FuelTech - PS-3000 Pressure Sensor (0-3000 PSI)

Typically used for wheelie bar load cells. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-3000 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - PS-1500 Pressure Sensor (0-1500 PSI)

Typically used to monitor nitrous bottle and brake pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-1500 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - PS-500 Pressure Sensor (0-500 PSI)

Typically used to monitor transmission, converter, clutch, and mechanical fuel pressure. Output: 0.5-4.5V Supply: 5V Range: 0-500 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal

FuelTech - PS-300 Pressure Sensor (0-300 PSI)

Typically used to monitor fuel, oil, and wastegate pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-300 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - PS-150 Pressure Sensor (0-150 PSI)

Typically used to monitor fuel, oil, and wastegate pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-150 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - Map Clamper

Used to freeze the stock MAP / MAF signal when it reaches a certain value, preventing the sensor from sending a value that is out of range for the stock ECU when going into boost.

FuelTech - VR-Hall Converter

The VR-HALL converter was designed to read an analog VR signal and transform it to a digital signal (Hall). Recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel flow meters.  Not compatible with differential...

FuelTech - FT Dual Power Driver

FEATURES   The FT Dual Power Driver has two half bridge outputs that allows the activation of up to 25A current. With two half bridge outputs the DPD can drive a single motor in two directions, or two motors in a single direction. Able to drive high...

FuelTech - FT Dial Board

FT DIAL BOARD was designed to make it quick and easy to display your dial-in when bracket racing. Seamless integration with FuelTech ECUs makes it simple to adjust your dial-in on the fly with a few clicks on the ECU screen. Two FT Dial Boards can be...

FuelTech - FT Injector 230 LB/H

The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES   REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...

FuelTech - FT Injector 320 LB/H

The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES   REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...

FuelTech - FT Injector 520 LB/H

The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required. FEATURES   REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all...