Engine Components

FuelTech - WB-O2 Sensor

Bosch WB-O2 sensor compatible with the following FuelTech products: WB-O2 Nano Alcohol O2 WB-O2 Datalogge WB-O2 Slim Sensor life drastically reduced when used with leaded fuel, diesel or 2 stroke engines. Thread size: M18 x 1.5

FuelTech - Flex Fuel Sensor

Ethanol content is a basis for many functions in an engine. The ethanol content as a variable can be the difference between having optimised ignition timing, fuel injection and boost levels when tuning versus average output when not compensating for the...

FuelTech - Backpressure Dampening Canister

The FuelTech Backpressure Dampening Canister is a great addition to any turbocharged engine. Measuring the exhaust back pressure is vital data required to best determine the true efficiency of your combination. FEATURES By separating the back-pressure...

FuelTech - PS-10B Pressure Sensor (0-10 Bar)

Typically used to monitor fuel, oil, and wastegate pressure. *Not compatible with PRO500/PRO600 or other complete FuelTech engine harnesses. Use PS-150 for these applications. TECHNICAL DESCRIPTION Output: 1-5V Supply: 12V Range: 0-10...

FuelTech - PS-3000 Pressure Sensor (0-3000 PSI)

Typically used for wheelie bar load cells. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-3000 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - PS-1500 Pressure Sensor (0-1500 PSI)

Typically used to monitor nitrous bottle and brake pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-1500 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - PS-500 Pressure Sensor (0-500 PSI)

Typically used to monitor transmission, converter, clutch, and mechanical fuel pressure. Output: 0.5-4.5V Supply: 5V Range: 0-500 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal

FuelTech - PS-300 Pressure Sensor (0-300 PSI)

Typically used to monitor fuel, oil, and wastegate pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-300 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - PS-150 Pressure Sensor (0-150 PSI)

Typically used to monitor fuel, oil, and wastegate pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-150 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECS Performance Long Term Drift: 0.2% FS/YR...

FuelTech - Map Clamper

Used to freeze the stock MAP / MAF signal when it reaches a certain value, preventing the sensor from sending a value that is out of range for the stock ECU when going into boost.

FuelTech - VR-Hall Converter

The VR-HALL converter was designed to read an analog VR signal and transform it to a digital signal (Hall). Recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel flow meters.  Not compatible with differential...

FuelTech - FT Dual Power Driver

FEATURES   The FT Dual Power Driver has two half bridge outputs that allows the activation of up to 25A current. With two half bridge outputs the DPD can drive a single motor in two directions, or two motors in a single direction. Able to drive high...